Search models, users, collections, and posts
MRB063A USB Cable Checker Case
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
Open in Bambu Studio
Boost
15
25
7
2
76
37
Released
Description
This is a case for a USB Cable Checker model MRB063A available from many sources such as AliExpress. The top part shall be printed with is face on the bed. The 3mf file contains the top part with lettering to be printed with 2 colors. The USB B connector cap must be glued with a few dabs of superglue. 4 2.5 mm x 5 mm brass inserts along with 4 M2.5 x 8 mm screws are required. They can be replaced with other screws without brass inserts.
Support material is optional but not required. An infill of 20% is recommended.
This object main web page is: http://www.ctheroux.com/mrb063a-usb-cable-checker-case/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (7)