Search models, users, collections, and posts

Suex DPV stand

chrisfmills
Hobby & DIY>Sport & Outdoors
IP Report

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.6mm nozzle, 0.3mm layer, 4 walls, 10% infill
0.6mm nozzle, 0.3mm layer, 4 walls, 10% infill
Designer
2.7 h
1 plate
5.0(2)
Open in Bambu Studio
Boost
19
46
5
0
70
22
Released 

Description

Stand for a Suex XJ-S DPV. Designed to use 1 ½" (nominal size) ABS pipe. Print two of the stand, then slot in ABS pipe, and use solvent to secure if you feel like it.

 

Note the orientation for printing, the top side has filleted edges - print the completely flat side down. Suggest using a brim to prevent the part warping off the build plate.

 

Onshape model available here if you need to resize it for other scooters.

suex
dpv
scooter
diving
scuba

Comment & Rating (5)

(0/1000)
@clinares
Which model Suex have you tried this on as-is? The diameters for these scooters are all around 200 mm, so I imagine that's close enough for all the Suex ones. The part I'm less sure about is the extra diameter caused by the shroud and the small bump opposite the handle. This would need maybe 2-3 cm size changed for some of the DPVs with larger props
(Edited)
The designer has replied
0
Reply
@chrisfmills
This works on my XJ-S as-is. The bump opposite the handle clears the ground, the handle does not.
0
Reply
@clinares
Really? At 100%? I printed using the profile here, but the bump does not clear the ground for an XJS. I tried looking at the OnShape link to tweak, and it looks like a different model that appears incomplete
(Edited)
0
Reply
@Dobel
Print Profile
0.6mm nozzle, 0.3mm layer, 4 walls, 10% infill
I’m glad I found it
0
Reply
@clinares
Print Profile
0.6mm nozzle, 0.3mm layer, 4 walls, 10% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

笔记本电脑支架 Laptop Stand
Laptop Stand
Siegroto
37 k
8.9 k
Vertical laptop stand
Vertical laptop stand
Meraki design
28.2 k
7.3 k
Adjustable phone stand
GIF
Adjustable phone stand
3D servis
25.6 k
6.8 k
Dummy 13 Locking Stand
Dummy 13 Locking Stand
Shadymilkman
28.1 k
6.6 k