Pumpkin Rubberduck / Pumpkin duck / Halloween Duck

Willkommen bei Frank druckt 3D

Welcome to Frank druckt 3D

Frank 3D Printsへようこそ

欢迎来到 Frank prints 3D

Im a hobbyist with ambitions. You can find me here and on other Platforms. My main Platform is TikTok. The time for my Website is rare so please do not expect too much updates. On TikTok you should find daily videos about 3d printing and my Journey! Please consider following me and keep asking questions, i will try to help everybody as long as i am able too!

Please read the FAQ at the Bottom

My newest creation is this fearsome scary (not) rubberduck. I printed it just in grey pla matte (jayo) and quit small cause i am actually waiting for a new delivery, sorry ;-)

A colored version is also availabe. It would be thankful if anyone could take a look if the coloring is ok that way, its my first time with a colored model, so please do not be too hard ;-)

The model in the Pircture is printed without any supports. Of course if you print bigger you will need supports, make sure to control if they are turned on before printing a scaled model!

This Model should be easy to paint if you want. I hope we will see a lot of funny and scary paintings in here!

If you like this model you may also like this:

Amuly - The Fantasy Creature and my collection of scary pumpkin Models

that was just released. I had a lot of work with those pumpkins. I provide a small one, a collection of three small ones, a middle sized and an verry easy to paint pumpkin bowl with lid to paint with your kids, or for your own. Its designed to even enable absolute art killers like me but unfortunately i was dumb enough to drop a spool of Filament onto the lid, from the top of my room down to the ground. The spool was full and so the lid broke, otherwise you would really be scared when i show off my painting skills ;-) believe me this is as horrible as a sign saying “more taxes” at Halloween night…

…ive also some other models online but i think nothing or real interest for anybody else than me, just wanted to save them here and give them to you if you could need them anyway. They shouldn´t get lost on my harddrive but this three you see here are my hughe hope and maybe they will be a start into something new ;-) if you want!

If you don´t want to give me a boost or have already enough decoration pffft as there would be such a thing like enough decoration, you are invited to join me on TikTok! My videos are mostly in german language but i try to give you english subtitles and as you might read from this text, my english maybe not verry good but for a simple conversation it should be enough, dont you think? Let´s give it a try!

Visit me on TikTok, Instagram (brand new) or here! Thanks in advance for your consideration…

yours Frank

FAQ:

I have problems with my First Layer or the print get´s loose from Buildplate!

Please note: The initial Layer is set to 0.08mm to get a smoother First layer! This can cause problems when not everything works perfect, like filament, calibration and buildplate. For me it works most of times perfectly, if i do not use cheap filaments but if you encounter any problems like prints that get loose or ugly first layers you should restore the standard 0.2mm first layer Setting!

The print produces too much poop

Yes this model causes a lot of poop. You will see the exact ammount of used Filament in the Slicer after slicing! The Infill is reduced to a minimum therefore but i would suggest not to print only one of these ducks. A lot of people tell me that many friends and kids want one, so print a complete bed full of ducks instead. That will help to reduce the ppd factor (poop per duck)

If you like my work there are a lot of way how to support me! 

The easiest and most direct way is to leave a boost…

You can also support me with a membership! They start at the lowest tier possible here on makerworld. For just 3 bucks a month you can force me to continue uploading more and new models ;-) I wouldn´t be able to leave a month without new models when there are people who support me with their hard earned money… LoL therefore im to well educated ;-)

Also you can use my Amazon links in the descriptions, when i tell which Filament i use! Links like this here:

Buy PLA Filaments on Amazon

But the most convenient way to support me, without paying anything is to follow me on TikTok, leave some likes, share some videos and spread the message that im there! 

If you are a designer, you can also contact me to show your models, if you are a shop or manufacturer feel also free to reach out! Im here to show people the beauty of 3D printing and sharing my journey in this hobby. Showing off what others can do is also part of the game! Support ist kein Mord! (support is no murder, we say in germany)