Search models, users, collections, and posts
Pokemon Poke Ball
IP Report
Print Profile(4)
AMS color + printing by Objects
1.7 h
3 plates
0.16mm layer, 2 walls, 15% infill
3 h
3 plates
non-AMS friendly, 0.2mm layer, 15% infill, 3 plates
1.6 h
3 plates
AMS all-on-1 plate with 3 pegs - 0.16mm layer
1.3 h
1 plate
Open in Bambu Studio
Boost
1315
3013
360
136
5.3 k
3.4 k
Released
Description
This model of a Poké Ball is easy to print, feels solid, and makes a great cosplay prop. It's easy to assemble and is fun to toss around.
When printing, I used a 0.16mm layer height, 15% infill (gyroid), and 2 walls. Supports are not required, but they may help make the front “hole” cleaner.
- Print the body and button frame in black.
- Print two caps: one in red and one cap in white.
- Print the button in silver.
- Print three pegs in any color.
To assemble, use the second photo as a guide. Use glue to hold the ball together. Remember that the pegs are only used for alignment: they're not structural.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (360)