Unique Pendant Lamp

This is the most unique thing I have experienced so far in my time with 3D printers.
It's just a lampshade like any other, BUT with this special filament, every lamp looks different.
If you use a normal filament, it looks like the one marked "normal/test" in the picture.
If you use "the filament PLA clay white", every lampshade you print will look different (see picture marked with 1, 2 and 3).
I am so fascinated by it that each one shown is now hanging in one of my rooms. xD
You can achieve beautiful effects with a smart light bulb and the different brightnesses. It emits a cozy light.
No normal filament can keep up with this comparison.

That's enough of my rhapsodizing, I'll let the pictures speak for themselves.

The technical part:

- set the specified values (shown in the pictures) manually if you don't use Bambu/Orca Slicer
- Activate vase mode
- use a 0.6 nozzle, so you achieve a stable body
- use the quality settings as shown in the picture
- nozzle temperature: 220°C for all layers
- use a CHT nozzle (e.g. ALI-Express), do not print faster than indicated, print slower if you do not have a CHT!
- Print bed temperature depending on heating quality 55-60°C

Don't be sad if it doesn't work with the normal 0.6 nozzle. I have never tested it!

After one hour you will have a unique lampshade. With one spool you can create 6 shades with the specifications.
Give the lamp with socket and a smart light bulb as a gift.
The filament is also very nice for sculptures, vases and poker chips.

Keep it simple!