STARGATE SG-1 STIC WEAPON
Print Profile(1)
Bill of Materials
- flat-head screws M3x12 x 24:
- 10 rubber bands or 2 springs 10 mm and wire with a diameter of 2 mm and a length of 200 mm x 10: (depending on the chosen method of closing the front mechanism)
- Paints for the final surface finish x 1:
Description
I have prepared a model of the staff weapon. The core of the weapon is made of a wooden rod with a diameter of 25 mm and a length of 1620 mm.
For printing, use PLA material if it will serve as a home decoration, and ASA275 or another durable material if it will be exposed to higher temperatures. To make assembly easier, use cut printing filament as pins and super glue or acetone, depending on the material used.
For assembly, you will also need:
- 24 flat-head screws M3x12
- 10 rubber bands or 2 springs 10 mm and wire with a diameter of 2 mm and a length of 200 mm (depending on the chosen method of closing the front mechanism)
- Paints for the final surface finish
I am also preparing a version with light and sound effects, which I will add later.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (39)