Ikea Skadis on Ikea Bror - Adapter model
Print Profile(3)
Description
I created this adapter to mount Ikea Skadis to Ikea Bror.
In my project I used bror with 84x54 cm shelves but these adapters are potentially compatible for all other dimensions by choosing the correct skadis panel. You can also decide whether to mount the skadis panel on one or more sides.
Please note: you may need to cut the panel.
Boost Me (for free)
If you like this project, please give a đ and help me reach more makers like you!
Your support means everything! You can give me a đ, publish your remix creations and finally leave me a review. Thank you so much!
Printing instruction
Choose your layout and print the correct plate:
Assembly instruction
Follow the instructions based on the type of adapter to be mount:
Bill of material
I choose configuration 1.Back and side panels and the BoM is as follows:
- x32 Screw M5x16
- x32 Nut M5
- x32 Washer fender M5
- x12 Washer flat M5
- x1 Ikea Skadis 76x56cm
- x2 Ikea Skadis 56x56cm (Please Note: it is necessary to cut the panel to the width of 460mm)
Good print and enjoy this project!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (66)