Brio Duplo Connector Double - Free 3D Print Model

Search models, users, collections, and posts

Wouter

Toys & Games>Construction Sets

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.4 h

1 plate

4.1(17)

0.2mm layer, 2 walls, 15% infill

1.9 h

1 plate

4.9(8)

Open in Bambu Studio

Boost

510

366

188

Released

Description

build duplo and brio together, this block is the size of 3 duplo block

brio

duplo

brick

Comment & Rating (32)

@billatq

It looks nice when printed upright with supports, but while the bottom part grips, the studs at the top are too small to connect with duplo blocks. It looks like the issue is that the studs (per my calipers anyway) have a diameter of 9.1mm, and the duplo ones I have on hand are 9.3mm. The bottom part does seem to clamp okay though. For completeness, the block on top seems to to be pretty close at 31.6 x 63.4 (vs 31.6 x 63.6) on my duplo. The precision on these things is annoyingly high, so while this is close, it unfortunately doesn't work. (Printed at 0.2mm layer, 2 walls, 15% infill)

(Edited)

@uberroot

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

very nicely made. it looks like one of the gripping teeth are missing from the underside geometry

@eSeL__

Print Profile

0.2mm layer, 2 walls, 15% infill

This is the orientation I used. Was fine for me.

@klabbi81

does strange things using my A1 Mini. tried two different Bambu Lab Matte Filaments.

@user_2071220020

Print Profile

0.2mm layer, 2 walls, 15% infill

Printing is fine, the finished product is as shown in the picture

Show original

@user_465484246

Print Profile

0.2mm layer, 2 walls, 15% infill

The print quality is very good The adhesion on both knob sides is too low, or rather, nonexistent Here the model needs to be adapted and reworked

The profile uploader has replied

Show original

@szili83

Thanks!

@user_4128517123

Print Profile

0.2mm layer, 2 walls, 15% infill

is lying incorrectly on the bed

Show original

@user_396870906

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@szili83

Thanks!

@user_3365371659

Print Profile

0.2mm layer, 2 walls, 15% infill

friends kids love it

@user_2667486686

Print Profile

0.2mm layer, 2 walls, 15% infill

doesn’t fit well with my brio tracks

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.