Billy&Katie Hooper

cover

IMG_2256.jpeg

IMG_2255.jpeg

plate_1.png

2024-09-24_546cdfb44bc5a.jpeg

0.2mm layer, 2 walls, 15% infill

plate_2.png

MagnetDanny

0cacb6b2-a916-44fb-a037-269fe4824138.jfif

53811c55-57c1-42a1-a0a1-8b676ebe3e3c.jfif

537633ff-7436-49c7-84dc-ad96d536b676.jfif

80acf105-c1d4-43bf-b1f4-e1494383bf6f.jfif

scaled down within the slicer from 5K to 3.5K (by approximately 40%), 2 plates, had to use super glue for the leaves, 0.2mm layer, 2 walls, 10% infill, slowed down initial layer speed for better adhesion, added a brim for the flower with .25mm gap, Arachne Wall generator, tested on the A1 mini

scaled down by ~40%, 2 plates,0.2mm layer,2 walls,10% infill

Kelvin

rose.jpeg

Print by object to minimize filament waste. Added brim ears to the stem for adhesion.

Print by Object & Brim Ears 0.2mm layer, 2 walls, 15% infill

945d706b-8a01-4a67-911c-0808dfb39c68.jfif

dbed8ef0-ffc0-4962-a08a-2128d72e4220.jfif

1f23feeb-510c-4e60-854a-a6283489bd68.jfif

c3812b62-59d3-4c8a-b8cb-13e2bfcbe448.jfif

small scaled flower head only 0.2mm layer,3 walls,20% infill

small scaled rose head only 0.2mm layer,3 walls,20% infill

EVERYTHINGPLUSULTRA

20240926_200204.jpg

use 2 ams or use 1 ams and swap the next 4 colors in one after each other when it finishes one slot.

rainbow 7 color ams 0.2mm layer, 2 walls, 10% infill

JRYAN74

Rose without thorns 1 plate.PNG

Removed the thorns - No Ams - 1 plate - by object

Rose without thorns 1 plate

BarkingCauldron

4fd71dbc-256a-4a01-a671-408d9504e9d0.jpg

Tricolored rose printed on an A1 Mini. Corrected color order for Bi-Pride.

0.2mm layer, 2 walls, 10% infill

tkncgn

photo_2024-09-29_19-28-55.jpg

photo_2024-09-29_19-28-48.jpg

Scaled the model to 190% (about as big as you can go without cutting the stem into two parts). Slow print speeds for silk PLA (printed mine in Polymaker PolyLite Dual Silk PLA Sovereign Gold-Purple &amp; Starlight Aurora). Variable layer height &amp; ironing for the details.

Scaled to 190%, slow speeds for silk PLA, ironing

IMG_2272.jpeg

IMG_2271.jpeg

IMG_2270.jpeg

Printed on an A1 Mini. I have included the stem, although I usually print the stem separately in a plate. You can choose any colors you want for the different colors.

photo_2025-06-20_10-40-30.jpg

photo_2025-06-20_11-03-53.jpg

Slices to 5 separate colors, this is Trans Pride if you use the colors I have selected.

5 Color 0.2mm layer, 2 walls, 10% infill % 

Green + Brown

Biskup

20260620_172712.jpg

<ul><li>Separated plates, better material economy</li><li>0.16mm layer</li><li>2 walls</li><li> 15% infill</li></ul>

Separated plates 

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Yes, I want more boost. This is my boost message. </boostcontent></boostme>Prints in place without supports, if you remove the stem and leaves while they’re warm you can bend and form them to look more natural. DISCLAIMER: The thorns on the stem are pretty sharp, be careful when assembling the parts together.&nbsp;Consider joining my patreon for commercial license. It will directly help me continue to make you amazing designs like this. <a target="_blank" href="https://patreon.com/billyhooper" rel="nofollow noopener">https://patreon.com/billyhooper</a>&nbsp;

Rose

ASIA

Print Profile(11)

Description

Comment & Rating (1632)

License

Related Models