wall / desk clock Disney Stitch

I have made another Hueforge clock here. Maybe some of you also like this clock.
I could imagine that this watch would also be a very great gift for someone.

I created a version with 170 mm for the Wall/table and one for the Wall with 245 mm

Here you will only find the dials!
You can find the necessary accessories under the following link:

https://makerworld.com/en/collections/4894074

To minimize print time without compromising quality, I configured height range modifiers in my print profiles. So don't be surprised if the swap instructions don't match the data in the print profile

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to White for the rest.

If you get the message with the floating regions when slicing... you can ignore this
 

Here I have another money box or tool box with the same picture:

https://makerworld.com/en/models/988528-piggy-bank-tool-box-disney-stitch#profileId-963648

You are also welcome to visit my profile to find more great models:

https://makerworld.com/en/@cP3D