Fully functional table top Water Fountain with flowing water

Hey guys, here is a model for a fully functional tabletop water fountain. This waterfountain is consist of Five parts: 1. The base that holds water and water pump. 2. The adaptor screw for connecting the upper layer. 3,4,5. Water holder with screw end to connect with each other.

The middle part of the complex is hollow so that a rubber tube can be inserted for the pump to transport water to the top. You can print them in two plates, one with the base plate, one with other accessories.

Note that you will have to buy a mini pump with a rubber/plasitc tube (easy to get from amazon eg. search PULACO 95GPH 5W Mini Submersible Water Pump). The pump size will have to be around 1.8X1.8X1.4 inch and the tube will have to be 1/3inch in diameter.

When using it, you can try to put sea shells (shown in the picture) or other decorations on the edge of the fountain so that the water can flow in the direction you want.

Let me know if you have any question about setting the complex up. And enjoy watching and hearing the chill water flow from the water fountain!