Bike helmet hook

Search models, users, collections, and posts

ByteSlinger

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

Designer

50 min

1 plate

5.0(223)

0.2mm layer, 2 walls, 15% infill

39 min

1 plate

4.8(5)

Printed on its side with supports, 0.2mm layer, 6 walls

44 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

532

1822

261

119

2.7 k

2.3 k

Released

Description

This is a simple hook for you to hang your bike helmet from. It's designed with the two prongs to spread the load across the back head strap to ensure the weight of the whole helmet isn't putting pressure on a single part of the strap.

I've had my helmet hanging from this for around a year and it's still fine!

Print in the orientation it would be used (ie. with the spikes pointing upwards).

This will ensure both that overhang isn't an issue, but will also allow for maximum lateral strength for holding the weight of the helmets.

No supports are required for these hooks.

If you like my designs, thank me by Buying Me A Coffee Here!

Comment & Rating (261)

@24pixels

Boosted

This is brilliant. Such a perfect and simple design. It's exactly what I needed to get my helmet at arms reach as I head out the door for my morning ride.

The designer has replied

@ByteSlinger

Really glad you like it! Thanks for the boost and the rating! Happy riding!

@HeartSongDk

Print Profile

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

easy print thanks 👍

The profile uploader has replied

@ByteSlinger

Glad you like it, thanks for rating!

@OdatNurd

Boosted

Print Profile

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

this works perfectly and fits the bill exactly. shown here before I mounted it to the wall because based on the place that it's mounted, all you'd see is a helmet mysteriously hovering next to the wall. Good for a magic trick, bad for a review

The profile uploader has replied

@ByteSlinger

Haha good explanation, I faced the same dilemma when deciding what photos to take for the item page here. Thanks for the rating and glad you like it.

@LlamaFrmrNort

Boosted

Print Profile

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

works great

@iMihaiAr

Boosted

Print Profile

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

Simple and fast print. Very useful. Thank you!

@WillDaBeast222

Print Profile

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

holds it well. looks good too

The profile uploader has replied

@ByteSlinger

Glad you like it ☺️

@emc2cube

Print Profile

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

Great fit for Bell helmets

@Crusader32

Boosted

Print Profile

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

perfekt

@jsfn91

Boosted

Print Profile

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

Printed well and helmet fits nicely. Attached it with only 1 screw, as it seems enough.

@M.verbeke

Boosted

Print Profile

Single Bike Helmet Hook (0.16mm layer, 2 walls, 50% infill)

perfect

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.