Hear See and Speak No Evil

Here is my 2nd attempt at Hueforge

Project: Hear,See,Speak_No_Evil_75x75.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 75x75mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
    PLA Sunlu Black Transmission Distance: 0.1
    PLA Overture Space Gray Transmission Distance: 1.8
    PLA Eryone Light Grey Transmission Distance: 1.1
    PLA Sunlu White Transmission Distance: 7.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Space Gray
    At layer #13 (1.12mm) swap to Light Grey
    At layer #16 (1.36mm) swap to White for the rest.