Hunter Ultraman
Print Profile(3)
Description
Hunter Edition Superman figurine - I used PETG for printing with a layer height of 0.16mm. The original resin printed model has a contact surface on the support that is not conducive to FDM printing. Cutting the head supports makes it easier to print.
This model is printed on an A1 using PETG, it is best to use adhesive for the build plate. If you need to use PLA, you need to modify the print settings, reduce the printing speed and increase the overhang cooling. Otherwise, the overhang will not look good. The cape needs support, you must be careful, or the cape support will break. It is best to use hot glue to attach the parts. Liquid glue does not always stick well with different printing tolerances.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (66)