Search models, users, collections, and posts
Fume Extractor
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
3 h
1 plate
Open in Bambu Studio
Boost
1
2
0
0
1
0
Released
Description
THIS OBJECT HAS BEEN IMPROVED. The latest version can be found at https://www.prusaprinters.org/prints/43008-fume-extractor-v2 . This fume extractor uses carbon filters of 130mm x 130mm x 10mm. These are used for the HAKKO 491/493 fume extractor. To build it, you'll need:
- 2 x carbon filters of 130mm x 130mm x 10mm.
- 1 x 120 mm 12V computer fan
- 1 x KCD1-101 switch
- 1 x DC barrel power jack like the PRT-00119 from Sparkfun
- 4 x 6-32 screws of 1.5" in length (38 mm)
- 4 x 6-32 nuts
- Some wires
You also need a 12V power adapter with a 5.5 x 2.1 mm plug to power it.
You should not need support material to print it.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)