Voyager Satellite Desktop Model By: noahlileger - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Zolden_

Education>Physics & Astronomy

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

2.3 h

1 plate

4.9(19)

4 plate, 0.2mm layer, 2 walls, 15% infill

2.9 h

4 plates

5.0(26)

AMS, 0.2mm layer, 2 walls, 15% infill

10.5 h

1 plate

4.9(10)

Open in Bambu Studio

Boost

392

1135

1 k

548

Released

Description

* * * NOT MY WORK * * *

Note: my photos are the ones in full black

README.txt → Voyager Satellite Desktop Model by noahlileger on Thingiverse: https://www.thingiverse.com/thing:2556130

LICENSE.txt → This thing was created by Thingiverse user noahlileger, and is licensed under Creative Commons - Attribution - Non-Commercial

Description by original creator (noahlileger) below:

Summary

Happy 40th Birthday Voyager!

Here's my desktop model of the satellite. I've carefully broken the design into pieces that can be easily FDM printed. I've intended this design to be printed at 100um layers with a 0.4mm nozzle.

Everything should press together easily, but some dabs of glue could be useful to secure things in place.

There are 14 unique parts. 16 part to print in total. At 100um the total print time is around 8 hours.

Enjoy!

Print Settings

Printer brand:
Tinkerine
Printer:
Ditto Pro
Rafts:
No
Supports:
No
Resolution:
100um
Infill:
30%
Notes:
I recommend using 100 micron resolution and above as there are some step angles on the antenna reflector. (60% is steepest angle)
No support is required. Some features have minor bridging (<8mm)
All fits should be loose press fit. Glue may help with assembly but should not be required.

License

CC BY-NC

Voyager Satellite Desktop Model
by noahlileger is licensed under the Creative Commons - Attribution - Non-Commercial license.

voyager satellite desktop model

jet propulsion laboratory

Comment & Rating (68)

@gaming

Print Profile

4 plate, 0.2mm layer, 2 walls, 15% infill

Not very much detailed but a very nice model! I printed it one time in original size a and one time 160 percent upsized. Then some colour. That gives an impressive model in the room. Thank you!

@StarSDF

Print Profile

4 plate, 0.2mm layer, 2 walls, 15% infill

wonderful

The profile uploader has replied

@dawidlos

Boosted

Thanks 🙂

@PraarVerse

Print Profile

AMS, 0.2mm layer, 2 walls, 15% infill

great piece, definitely a collection item. Printed in PLA on A1 Mini

@user_1671604384

Boosted

Great print. Many thanks!

@future_vizion

this supposed to be normal? I can’t fit the back piece

@user_634044967

Awesome!

@ctschlosser

Boosted

Print Profile

4 plate, 0.2mm layer, 2 walls, 15% infill

design is great, printed mine with 0.2mm nozzle and 0.1mm layer height for some added detail. well done

@kpprt

Print Profile

4 plate, 0.2mm layer, 2 walls, 15% infill

Love it! And my son loves it, too! Thank you very much! 🙏 Just one note: we had to glue most of the parts together. Otherwise they would’ve fallen off right away.

(Edited)