Umarex Glock Base Plate - Free 3D Print Model

Search models, users, collections, and posts

Recticle

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 30% infill

Designer

22 min

1 plate

4.8(56)

Open in Bambu Studio

Boost

542

1399

1.3 k

822

Released

Description

Umarex Glock Magazine Base Plate

Base plate for the Umarex glocks gen 4 made in fusion 360 (kinda fits on gen.5 but easily breaks).

This thing prints without supports and slides right on after taking off the original base plate.

The pin catch works exactly like the original plate. This plate also removes any wiggle when the mag is in the gun.

I made it a tight fit so there won't be any wiggle. Sliding it on can go a little stiff. It should fit straight out of the printer but if your printer isn't as accurate and it won't fit at all, try horizontal expansion in you slicer (like -0,05 or -0.1)

I would love to see some makes

Print Settings

Printer:

Artillery Sidewinder X1

Rafts:

Supports:

Resolution:

0.2

Infill:

33% / 3 walls

Filament:

REAL Filament PLA

black

Category: Sport & Outdoors

Comment & Rating (78)

@mick_w

Boosted

Print Profile

0.2mm layer, 3 walls, 30% infill

I came here to confirm that it can fitted Umarex/VFC G17 gen5. Also it can survived multiple drop to ground (on grass and soft dirt/sand) in IPSC Action Air competition. Added info: I use PETG

The profile uploader has replied

@Recticle

awesome thanks for the info!

(Edited)

@Franlu

Print Profile

0.2mm layer, 3 walls, 30% infill

the design is awesome but I had problems with it because the spring doesn't fit well with the plate. It doesn't hold it in place I'm trying to figure where's the problem. if I find it I'll tell you

@user_2983318699

turned upside down

Show original

@darerekt

Boosted

Print Profile

0.2mm layer, 3 walls, 30% infill

Printed great, I printed it in PETG.

@JesusoV

Print Profile

0.2mm layer, 3 walls, 30% infill

looks great, little more annoying to refill on gas, looks cool tho

@JesusoV

looks great, little more annoying to refill gas, having to slide the plate off every time. but it looks cooler

@user_3618393889

Gen 5, PETG, scale Y 90%, also added fuzz - fits like a dream. Good work my friend!

(Edited)

@Nihsmik

Print Profile

0.2mm layer, 3 walls, 30% infill

I printed this using generic PLA, and the print quality was excellent. My VFC 19X seems to be slightly on the thicker side, so the rail adapter felt a bit tight. I gently heated the print and adjusted it slightly, and it mounted well. Overall, it’s an excellent model.