Construction Hard Hat for Brick Man - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

EC35 Studio

Toys & Games>Other Toys & Games

IP Report

Print Profile(1)

All

P1S

H2C

H2D Pro

H2S

H2D

X1 Carbon

X1E

P1P

A1 mini

P2S

X2D

A2L

0.2mm layer, 2 walls, 7% infill

Designer

3.4 h

1 plate

4.9(26)

Open in Bambu Studio

Boost

237

432

197

Released

Description

Boost Me (for free)

Boost mode: engaged I appreciate the⚡spark⚡- the ⚙️gears⚙️ are ready!

This is a remix of the construction hard-hat from @tokermc and is for use with the very excellent brick MegaMan by @JuliaEbert.

Note: This was designed for and only tested with the 10x figure by @JuliaEbert.

I found the version in the original profile to be a very loose fit. It is loose both on the top ‘post’ as well as around the head. I scaled it down to fit the head, but then I had to add a bit more material in the center hole to reduce the inner diameter so it would be snug on the center post of his head. I also added more supports.

It fits good enough now that you can turn it upside-down and it will stay on his head.

Comment & Rating (56)

@Kubik_Marik

Print Profile

0.2mm layer, 2 walls, 7% infill

perfect

The profile uploader has replied

@ec35studio

Thank you for the rating and the photo! Great print!! He is ready to go to work!

@MNMike

Where did you find the screwdriver?

@Kubik_Marik

try printables or thingiverse. I cant remember. :-)

@user_378410756

Boosted

Print Profile

0.2mm layer, 2 walls, 7% infill

Perfect fit and a quality design. No issues with the print. Was just what I was looking for. thanks!

The profile uploader has replied

@ec35studio

Looks great! Thank you for the rating!!

@TyrannicalTy

Boosted

Scaled this to fit an 8" Brick Man, made to thank a local customer. Love it! Thanks!

The designer has replied

@ec35studio

Look great! Thank you for boost!

@prin_T

Print Profile

0.2mm layer, 2 walls, 7% infill

passt perfekt

The profile uploader has replied

@ec35studio

Whoa! That looks amazing in white!

@KAKI.3D

Print Profile

0.2mm layer, 2 walls, 7% infill

Supports came off perfect, fits perfect!

The profile uploader has replied

@ec35studio

Very cool! Thank you for the rating! I like those colors too. Is that light blue a matte filament? What brand?

@user_3908162540

Boosted

Print Profile

0.2mm layer, 2 walls, 7% infill

perfect 😀

The profile uploader has replied

@ec35studio

Cool print! Thank you for the rating!

@gorkajub

Print Profile

0.2mm layer, 2 walls, 7% infill

The profile uploader has replied

@ec35studio

Ha Ha Nice!! French Bulldog for scale!! Thank you for the rating!

@PrintifyDK

Print Profile

0.2mm layer, 2 walls, 7% infill

Perfect fit. Easy print.

The profile uploader has replied

@ec35studio

I'm glad it worked well for you! Thank you for the rating!

@ReSiSn70

Print Profile

0.2mm layer, 2 walls, 7% infill

fits my figure by Bill Lab with just a 1% increase in size

The profile uploader has replied

@ec35studio

I am glad you were able to get it to work with another model. You had to scale up the @billlab figure, yes? This one was designed for, and only tested with, the 10x figure made by @JuliaEbert.