Pontiac Trans Am 1977 Seat Bushing

Just a simple Trans Am seat bushing that was hard to find.

I recommend using the provided print profiles to ensure everything fits properly.

You can check out my other models here:
https://makerworld.com/en/@oddarild/upload

Xtool F1/F2 Jig system

This system is fully compatible with all of the non ultra lasers. 

All the jigs need the baseplate to be printed first.

Jig System (compatible with xTool F1 Ultra, F2 Ultra, and F2 Ultra UV)

This jig system is fully compatible with all three machines: the xTool F1 Ultra, F2 Ultra, and F2 Ultra UV.

Once the base plate is installed on your laser, there’s no need to use any tools when switching between jigs.

Simply lift off the current jig and place a new one in position. The jigs will automatically self-center using the four tabs that extend from the base plate.

All of my files are designed to fit within a 256 × 256 mm build area.