Black Widow Yelena Belova Hueforge Wall Art

A Yelena Belova Hueforge design, for all Marvel fans.

Here's the links to my other relevant design collections:

• Black Widow - https://makerworld.com/@neilault/collections/2436905
• Marvel - https://makerworld.com/@neilault/collections/2191482
• Hueforge - https://makerworld.com/@neilault/collections/2433429

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 146.78 x 220mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA+ Elegoo Rapid Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Creality Silk Silver Transmission Distance: 1
PLA+ Elegoo Rapid White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Silver
At layer #18 (1.52mm) swap to White for the rest.

Please show your appreciation for this design and also help me to continue providing files to the community, especially for free commercial use.

Commercial Rights

If you wish to have commercial use rights, you can Buy Me a Coffee… https://buymeacoffee.com/neilault. One coffee (or more if you are feeling generous) allows you to commercially use your own prints of all my designs on here for life. No rights for selling the files or re-distributing them though. Once you have purchased a coffee DM me with your name and email used and I will add you to the list and send an authorised seller badge.