Microphone Rest - Microphone Stand
Print Profile(1)
Description
The microphone holder prevents it from falling off a table.
With the recess you ensure that the user takes the microphone at the correct position.
The recess is adapted to the LD Systems(C) microphone of the U50x series.
If you like, you can increase the infill at the bottom of the holder to get a higher weight.
I printed it with dynamic layer heights to get a nice surface.
You can stick rubber or felt strips to the underside for a better grip on the table.
-----
The microphone holder prevents the microphone from falling off the table.
With the recess you ensure that the user takes the microphone at the correct position.
If you like, you can increase the infill at the bottom of the holder to get a higher weight.
I printed it with dynamic layer heights to get a nice surface.
You can stick rubber or felt strips to the underside for a better grip on the table.
License
Comment & Rating (3)