Friday the 13th - Jason Voorhees Litho Night Night

Let Jason Voorhees, momma's favorite son, light up your room at night. This litho panel is 33.47x69.85x100mm on the build plate. The included print profile works great for me but the stl is also included in case you would rather slice yourself.

Here are links to the night light and LED bulbs I used for this project, found on Amazon.

LED Bulbs - I chose these bulbs primarily since they are LED they wouldn't generate enough heat to warp the PLA and I really liked the warm white effect they provide.

Night Light - If you use the linked night light for this project it includes a clip that is not needed as the clip is built into the model.

The litho shade was designed with the night light holder fit to the dimensions of the night light I had chosen to use. The clip section is 16.82mm wide and 4.72mm thick. If you are not using the linked light above, as long as it's ~ 17mm in diameter where the bulb is held it should work.

The lithophane pictured were printed in Polyterra Cotton White. Previously I was using Overture white but really like the way matte finish impacts details for these.