Christmas Tree Light - WLED Version - Free 3D Print Model

Search models, users, collections, and posts

Modular Mapping

Household>Decor

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 0% infill

Designer

4.5 h

2 plates

5.0(14)

Open in Bambu Studio

Boost

227

473

384

159

Released

Description

How to build the LED Christmas Tree:

What you need:

5 pixels of WS2811 (5V) LED chain
A NODE MCU or some other ESP8266 controller
3 M3x10mm screws to srew the bas to the tree
4 M2.5x10mm screws to screw the NodeMCU to the base

How to flash your ESP:

go to https://kno.wled.ge/basics/getting-started/ or https://install.wled.me/
follow the instructions to flash the ESP
if you have problems and need help, contact me :)

How to build:

glue the 5 LED pixel in place
connect the 3 pins from the LEDs to the Node MCU, ground to GND, signal to D4 (by default) 5V to VU
screw the NodeMCU onto the base
try if everything works
screw the lid onto the ground of the module

Have fun with this project! If you need help at any point feel free to contact me!

Comment & Rating (24)

@dpatrignani

Print Profile

0.2mm layer, 2 walls, 0% infill

printed great

The profile uploader has replied

@ModularMapping

Thanks for the picture :)

@user_2260026181

What filament did you use please? I have only been working with PLA so far and wondering if I should give it a go with PLA or whether I’d need a different material?

@ModularMapping

Replying to @user_2260026181 :

I used transparent PLA, prints easier than PETG in my opinion :)

@Maaght

Print Profile

0.2mm layer, 2 walls, 0% infill

I printed it in transparent green PETG in vase mode and shrunk it down 50%

The profile uploader has replied

@ModularMapping

Yeah i also started like this, but it was too flimsy then in PLA, probably just fine in PETG tho :D thanks for sharing!

(Edited)

@ismags

Very nice, thank you very much for the model Printed in white PLA with blue interior light

The designer has replied

Show original

@ModularMapping

Thanks, looks great!

@vivi.rin

worked out really well, so pretty

The designer has replied

@ModularMapping

Thanks so much, looks great!

@nafoute37

Boosted

Print Profile

0.2mm layer, 2 walls, 0% infill

great in transparent pla and mini usb garland

Show original

@FuzzyDicePHL

Boosted

Print Profile

0.2mm layer, 2 walls, 0% infill

@RogueLeader

Print Profile

0.2mm layer, 2 walls, 0% infill

great job.... looks great

The profile uploader has replied

@ModularMapping

Thanks!

@AW3D

Print Profile

0.2mm layer, 2 walls, 0% infill

top

@Briyork

Print Profile

0.2mm layer, 2 walls, 0% infill

I printed this in CookieCad Funfetti filament. It came out so well! I'm waiting on the LED's to arrive to so I can put everything together and watch it shine :) Thank you for sharing!

@Lufkin

Print Profile

0.2mm layer, 2 walls, 0% infill

beautiful

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Meshed Christmas Tree

Maxx Design

22.7 k

7.3 k

Christmas Trees

gabriele_ristallo

43 k

14.6 k

Christmas trees (tealight compatible)

SabreDesign

27.8 k

8 k

Modern Christmas Trees

lov3d

32.1 k

8.6 k