love the gun, was sad that it when I glued the front if the gun it shifted 1mm. had to sand it to fix it up.
barrel for me catches on this version, struggled to keep the gun from opening itself due to the front end weight.
might be worth reducing the infill a bit (printed it all on 15%), to reduce the weight.
make sure to use 8x4mm neodymium magnets for the clip and barrel (barrel spin speed is affected by the battery)
was a really nice build to put together! had to split the barrel to fit on my a1 mini. that really helped since it made it easy to reduce the infill at the end. only problem was between the barrel and the trigger there’s no alignment pins/pegs so stabilizing that while it glued was tougher.
Excellent print when done. Definitely need magnets to hold the top close otherwise the revolver part keeps opening and failing out. Printed the front part with 5% infill to make it lighter after seeing many of the comments about it being front heavy. Using sandpaper to rough the 2 bases and then using super glue worked perfectly to get it glued together.
Comment & Rating (38)