Easy, quick print. Helped clean up my desk. 

jjdavis1981

0.2mm layer, 2 walls, 15% infill

Skvělý držák , rychlý a přesný tisk. Použité PLA.

Great holder, fast and precise printing. PLA used

J@Skal

Super držák, perfektní čístá práce, tiskl jsem PLA s podporou. 

Super holder, perfectly clean work, I printed PLA with support

NeuSas

Great idea and prints well.  Thanks for sharing!

Ant Plus

David Reis

0.2mm layer, 3 walls, 25% infill

Rospobello

Nice model. I had some layer shifting, but that was caused by my printer and it's barely visible.. I did not want to drill into the wall, so I removed the holes and glued it to the wall with strong double sided tape.

Fabian

7oneliness

jimtengo

Finn

cover

helmetholder.PNG

IMG-20220916-WA0002.jpg

IMG-20230222-WA0000.jpg

plate_1.png

IMG-20220916-WA0002~2.jpg

I updated the existing profile after hearing feedback about strength issues with the commands.I increased the infill and wall count to make the holder stronger.Thanks for the feedback! :)

IMG_3178.jpeg

Printed this for my helmet and glasses. Works great and does the job. Uploaded printprofile so other can use it with ease.Support is needed for this.&nbsp;Please rate the print profile if you like it :-)&nbsp;Printet on A1Printet in PLA0.2mm layerInfill 15%Adaptec cubic

PXL_20250818_103726706.jpg

PXL_20250818_103656698.jpg

Added modifier that removes the holes.Can be used if you want to glue it to the wall with double sided tape.

Without Holes. 0.2mm layer, 3 walls, 25% infill

A simple helmet and sunglasses holder to get your bike equipment organized. All your needed equipment in one place. Easy to print and simple to install.

Print Profile(3)

Description

Comment & Rating (103)

License

Remixes (1)

Related Models

Bike helmet hook with sunglasses holder