HUEFORGE YUKINO_3
Print Profile(1)
Description
Eyes can change with the angle.
Disclaimer: The original image is not my work, I liked the image and used PS to modify its greyscale to fit hueforge prints.
Project: yukino_7.hfp
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mm
The Model is 230x275.96mm in size
You may print at higher layer heights below the Min Depth of 0.46mm
The Max Depth is 2.7mm and the Actual Depth is 2.7mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.64mm) swap to Marine Blue
At layer #12 (0.82mm) swap to Ivory White
At layer #17 (1.12mm) swap to Red
At layer #21 (1.36mm) swap to Yellow
At layer #22 (1.42mm) swap to Beige
At layer #26 (1.66mm) swap to Ivory White
At layer #28 (1.78mm) swap to Black
At layer #29 (1.84mm) swap to Red
At layer #33 (2.08mm) swap to BambuLab Green
At layer #36 (2.26mm) swap to Black
At layer #39 (2.44mm) swap to Ivory White for the rest.
First pause. Blue for yellow. Black for flesh.
Second time out. Flesh for black. Yellow for green.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)