Rear Dust Cover for P1P, P1S, and X1 - Free 3D Print Model

Search models, users, collections, and posts

br1acc

3D Printer>3D Printer Parts

IP Report

Print Profile(5)

All

P1S

P2S

A2L

H2S

A1 mini

X1 Carbon

X1E

P1P

H2D

H2C

X2D

H2D Pro

PLA, 0.2mm layer, 2 walls, 15% infill

Designer

12 min

1 plate

4.9(1.2 k)

PETG, 0.2mm layer, 2 walls, 15% infill

Designer

15 min

1 plate

4.9(578)

TPU, 0.2mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

4.9(62)

ABS, 0.2mm layer, 2 walls, 15% infill

15 min

1 plate

4.8(9)

Click to see more

Open in Bambu Studio

Boost

2840

8806

1990

198

11.9 k

9.5 k

Released

Description

Cover to prevent dust and debris from falling into the screw holes at the back of the P1 & X1.
Included are profiles for PLA, TPU, and PETG.

TPU is recommended for the best possible fit.

Optimized for 0.4mm nozzles and 0.20mm layer height.

Installation:

Push into place with your fingers, and make sure it's fully seated.
You might need to use a little more force to get the left and right corners down all the way.

If the left and right edges of the print lift up after installation, try printing the alternative version.

This is included with the normal print profiles, but you will need to unhide it from the plate.

Comment & Rating (1990)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.