Summary

This is the screw cover for the skirt/air diffuser of a smart fortwo 2015 (probably the whole generation too). This is the small cover that are under the bigger one that cover the bumper screw.

Print Settings

Printer Brand:

Bambulabs

                                            Printer:                      
Bambu P1S

Rafts:

Doesn't Matter

                                            Supports:                      
Doesn't Matter

Infill:

25% gyroid

                Filament: Bambulab ASA                    
                        Notes:                     
No support but ASA is really recommended for long time fix.

Post-Printing

Probably some adjustment needed :

            If using an FDM printer, you will most likely need to sand/smooth the claw type teeth so it doesn't break and slide easily on the retaining latch. You might even need a touch of glue to make it really hold, if you lost that that, it is mostly due to wear and can't be retained (like mine). The screw can also be misplaced and be the reason the original and printed part can't be fully inserted.
            
            Original on top
                
            Original on top