Parametric Under Desk Cable Clip (Default 15mm) - Free 3D Print Model

Search models, users, collections, and posts

plugowski

Household>Office

IP Report

Print Profile(3)

All

X1 Carbon

A1 mini

P1P

H2D

P1S

H2D Pro

H2S

P2S

X1E

H2C

X2D

A2L

0.28mm layer, 2 walls, 20% infill

Designer

19 min

1 plate

4.9(332)

LARGER 150%, 0.28mm layer, 2 walls, 20% infill

34 min

1 plate

5.0(39)

12 Pack LARGER 150%, 0.28mm layer, 2 walls, 20% infill

5.4 h

1 plate

5.0(33)

Open in Bambu Studio

Boost

743

2258

458

306

4.3 k

3.2 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Rectangular Double Sided Foam Tape

Description

NEW UPDATE - NOW CABLE CLIP IS FULLY CUSTOMIZABLE!

Now you can customize your cable clips exactly the way you want with a fully parametric model.

Just set your preferred length, height, and width - and poof! - your perfect clip is ready to print.

You can also decide how many screw holes do you need, if any :)

If your printer isn’t happy with a 0.2 mm tolerance, no worries. Simply bump it up a little and you’re good to go!

Boost Me (for free)

Enjoy using the parametric cable clip? Give the model a boost! Your support helps me refine the design and keep releasing better, smarter versions.

---

Building on the strengths of the original design, version 3.0 strikes the perfect balance with a 15mm thickness - right between the original and version 2.0 - delivering optimal stability without sacrificing printing time.

The hinge has been reinforced for enhanced durability, ensuring long-lasting performance. Whether you prefer screw installation or high-adhesion tape, the choice is yours. And with a newly refined, satisfying “click” when locking your cables in place, you can count on them staying secure and organized with minimal side movement.

Thanks to its printed-in-place construction and tight hinge mechanism, Version 3.0 guarantees durability and reliability. Say goodbye to cable clutter and tangles, and enjoy a cleaner, more stylish workspace.

Perfect for those who value both function and aesthetics, this upgraded version is designed to keep your cables in check while looking great. Give it a try and experience the difference!

Comment & Rating (458)

@Moose_Lord

Print Profile

0.28mm layer, 2 walls, 20% infill

Absolutely love this design and excited to shape my cable management around it. Prints great with stock setting for Bambu PETG HS and green PLA Matte. I can’t for the life of me figure out why my PLA matte in black keeps fusing together at the hinge. All material settings are identical to green and I allow flow rate calibration every time.

@user_3178297083

+1 on PLA Matte Black, fused hinge when printing on A1 Mini. Trying in a different colour

@Westbound

Print Profile

0.28mm layer, 2 walls, 20% infill

This Clip is exactly what I needed. It is very well designed and has a very satisfying clip. I printed it with Matte PLA and it came out great!

@obeyMM

Boosted

I’m using them with command strips to hold up my climbing plants. A lot more sturdy than the ones I found that were made for that purpose!

@DenoD

Print Profile

0.28mm layer, 2 walls, 20% infill

worked great! the joints couldn’t be any smoother!!

@user_2577362295

Print Profile

0.28mm layer, 2 walls, 20% infill

I have printed it at 80%, 100%, and 120% sizes and it is perfect every time

The profile uploader has replied

Show original

@plugowski

Why you just didn't use customize option to make it bigger. Scaling model will scale tolerances as well. I don't recommend that.

(Edited)

@WezOfficial

Boosted

Print Profile

0.28mm layer, 2 walls, 20% infill

These are magic and stronger than I was expecting. I will be using them again.

@NXROne

Print Profile

0.28mm layer, 2 walls, 20% infill

Very good helper for cable management. No more cable mess on the floor. Thank you for sharing this model. I used a cheap PETG filament from Geeetech and it still looks great and its perfectly functional. No need to use expensive Filament. Thanks

@user_3987810592

The hinge stocked so we'll I couldn't move it 😕

The designer has replied

@plugowski

You have to calibrate your filament properly, to be sure that small tolerances with hinge will not affect your print.

@ochi

Print Profile

0.28mm layer, 2 walls, 20% infill

fulfills its purpose, great design

@Hendrik3D

Boosted

Print Profile

0.28mm layer, 2 walls, 20% infill

very nice, thanks!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.