Small Optimized A1 Poop Bucket

New smaller poop bucket for people who don't need a large capacity, or who don't have a lot of space.

External dimensions :
- Height: ~80 mm 
- Length ("along" the printer): ~163 mm 
- Width: ~89 mm
- thickness: 1,6 mm
 

For those who want a bigger bucket see here:

And a brand new version attached to the printer:

Specially designed for the Bambu Lab A1 with or without stiffeners placed at the rear.
Although it is not that small, it prints in 1h47 with 90g of filament (version 1 color layer 0.28)

Like its big sister, it has space for 2 magnets with a diameter of 8 x 2 mm, use strong neodymium N52 so that it remains attached to the printer.

I added a deflector that attaches to the left end of the X axis and which directs the poops downwards, this allows the walls of the bucket not to be built too high. It weighs only 6g and does not slow down head movements in any way.
I advise you to stick a little aluminum foil on the inside face to prevent the poops from sticking  ;-)

I drew the Bambu logo hollow and gave a little more thickness to the side flap, the printed result is better.
 

The bucket is intentionally rotated slightly on the platen, I have found that this configuration gives the best printing results.

Find all my accessories for your printer here:

________________________________________________________________________________________________________________________________

New smaller poop bucket for people who don't need a large capacity, or who don't have much space.

External dimensions

- Height: ~80 mm 

- Length ("along" the printer): ~163 mm 

- Width: ~89 mm
- Thickness: 1.6 mm

For those who want a bigger bucket see here:

And a brand new version attached to the printer:

Specially designed for the Bambu Lab A1 with or without stiffeners placed at the rear.
Although it is not that small, it prints in 1h47 with 90g of filament (version 1 color layer 0.28)

Like its big sister, it has space for 2 magnets with a diameter of 8 x 2 mm, use strong neodymium N52 so that it remains attached to the printer.

I added a deflector that attaches to the left end of the X axis and which directs the poops downwards, this allows the walls of the bucket not to be built too high. It weighs only 6g and does not slow down head movements in any way.
I advise you to stick a little aluminum foil on the inside face to prevent the poops from sticking ;-)
I drew the Bambu logo hollow and gave a little more thickness to the side flap, the printed result is better.

The bucket is intentionally rotated slightly on the platen, I have found that this configuration gives the best printing results.

Find all my accessories for your printer here: