Keurig Covfefe Scoop

Do you use a refillable Keurig pod, OEM or otherwise? Do you get tired of cleaning coffee grounds off the counter and floor because it's hard to funnel those delicious morsels into the small filter assembly?

This scoop solves that problem. You simply fill the scoop to the desired level, place the filter basket upside down over the top, then invert - no mess. The top of the scoop fits just inside the filter so there are no catastrophes when it comes to your morning (or afternoon) ritual.

Here's the filter that I use but anyone that fits your machine should work: Keurig My K-Cup Universal

I found the original file on Thingiverse months ago and have been using it ever since. I made the following updates:

• text on base of handle (covfefe)
• negative space for 20x3mm magnet with a pause on layer 25 (4.04mm) for inserting magnet
• reduced layer size to .16
• 4 walls
• 15% gyroid infill
• scarf seam

The profile contains both a covfefe scoop with an embedded magnet and without. As you can see in the picture the outline of the magnet may be visible depending on your filament choice.

Link to magnets used for this project 20x3mm

Alternatively you can use the link in the BOM (Bill of Materials) below.