Totoro Lightbox Lamp

Commercial license at -----> https://www.patreon.com/Valda3DPrinting

This is the first release of a new type of lightboxes : "The Smalls"

Size: 120 x 67 x 18 mm

You will find each file named by color for an easy setting

If you don't use the 3mf file:

• Import them in Bambulab/Orca/your slicer as single object with multiple parts.
• Assign each color to the same named part ("wall" is usually withe to create a nice bright outline)
• Use a PEI Textured plate for an optimal result

• To achieve a nice result be sure to have settings as follow (if you don't use my profiles)

  • first layer flow ratio = 1.05
  • wall transitioning threshold angle = 50°
  • Infill/wall overlap = 20%
  • Avoid crossing walls
  • Wall generator Arachne

   

  I've used "Bambulab Blue-Grey" Pla basic to achieve this result of transparency with the light.

With light off the color is blue-grey but with light on it became white!

Use different colors to have different results :-)

I've used this 50 cm led strip (warm white) with power switch

https://s.click.aliexpress.com/e/_Dd3PGf9

It fits perfectly the backbox size and you have an ON/OFF switch.

You can put a drop of glue on the inside where the cable comes in to make it more stable.

Happy Printings!

-D-