Search models, users, collections, and posts
Magnet Insertion Tool v2
IP Report
GIF
GIF
Print Profile(13)
5x1 Variant - 2 Plates, 0.2mm layer height
Designer
4.3 h
2 plates
6x2mm (Gridfinity Spec) - 0.2mm layer, 2 walls, 12% infill
8.3 h
3 plates
P1S 8x2mm 0.2mm layer, 2 walls, 12% infill
4 h
2 plates
6x3mm - 0.2mm layer, 2 walls, 15% infill
8.5 h
3 plates
Click to see more
Open in Bambu Studio
Boost
2512
6644
516
507
3.4 k
1.7 k
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
List other parts
- supportedMagnets of Choice x 3:
- Superglue x 1:
Description
UPDATE 20.09.2024
- 6x3mm Magnet Variant added
INTRODUCTION
v2 of my Magnet Insertion Tool, with
- optimized Tip size
- trigger suspension
- self reloading Magnet Magazine
HARDWARE
Magnet sizes currently tested and supported:
- 5x1mm
- 6x2mm
- 8x2mm
- 6x3mm
Magnets i used:
5x1mm (reflink)
6x2mm (No longer available on Amazon)
8x2mm (No longer available on Amazon)
FILAMENT
i used this PLA+ but any other Pla should work as well
PLA+ (reflink)
Other Hardware you need:
- 2x M3x6mm
- 3x M3x10mm
- Rubberband
- 3x Magnets of selected size
ASSEMBLY
There is a PDF attached to the files with assembly instructions as well as some simple Assembly steps shown in the Video
I reccomend printing 2 tools. 1 for each pole of the magnet. I printed one in Red and one in blue.
Support my work by becoming a PATREON
Documentation (1)
Assembly Guide (1)
AssemblyInstructions1.1.pdf
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (516)