Cute Unicorn, Lucky Pi Xiu Ornament

Unicorn and Pixiu Figurine

Model has been optimized for overhangs, requiring fewer supports

Size: The model is designed to be printed at a height of 64mm, but you can scale it to your needs. Scaling needs to be set in your desktop slicing software.

Supports: The print configuration is pre-set with supports. They are easy to remove. The layer height is 0.2mm. You can print directly from your phone's app.

For finer print quality, you can set a lower layer height in your desktop slicing software (When a pop-up window appears, remember to choose "Use modified value"). The print time will increase accordingly.

Filament:

The gold color in the picture uses Bambu PLA Silk Gold 13401 Click to buy

The red color in the picture uses Bambu PLA Basic Red 10200 Click to buy

3D Printing Precautions
In my experience, the following points are important for daily printing:
1. Clean the build plate regularly! If possible, it's recommended to wipe the build plate with a damp towel before each print to reduce the chance of the first layer not sticking or peeling off.
2. Make sure your filament is dry, and change the desiccant in your AMS promptly to reduce stringing.
3. Update your desktop slicing software and mobile app to the latest version. Update your printer firmware in time.

For more questions and precautions, you can consult customer service or check theBambu Official Wiki:
Bambu Mobile App (Bambu Handy) Printing Tutorial Click to view
Common Questions Guide for Filament and Accessories Click to view
Bambu Desktop Slicing Software (Bambu Studio) Printing Tutorial Click to view