Cover for rear tweeter, 306 Cabriolet/Roadster
Print Profile(0)
Description
ENG
The part is in its raw form. To achieve the "grid" effect, you will need to make modifications in the slicer (PrusaSlicer).
Official tutorial: https://www.youtube.com/watch?v=6PVeh43Or-g.
The modifier cylinder must be 39.23/39.23/0.6 mm and centered on the part (same coordinates).
Print parameters:
- 2 walls
- 0.2mm or 0.15 layer Height
- Infill depending on the desired pattern (see video above).
I tested two patterns:
- Honeycomb 50%
- Triangle 80%
I think it's quite beautiful (see photos).
It's up to you to test and customize your cache.
Happy printing
FR:
The part is in its raw form. To achieve the "grid" effect, you will need to make modifications in the slicer (PrusaSlicer).
Official tutorial: https://www.youtube.com/watch?v=6PVeh43Or-g.
The modifier cylinder must be 39.23/39.23/0.6 mm and centered on the part (same coordinates).
Printing parameters:
- 2 walls
- 0.2mm or 0.15 layer Height
- Infill depending on the desired pattern (see video above).
I tested two patterns:
- Honeycomb 50%
- Triangle 80%
I think it's quite beautiful (see photo).
It's up to you to test and customize your cache.
Happy printing
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)