Ryvid Anthem - Side Plate Bracket (Fender Delete)
Print Profile(1)
Description
I made a side mount license plate bracket that replaces the fender on the Ryvid Anthem.
- It bolts into the existing M6 holes on the swing arm through the belt cover.
- The bracket where the plate attaches tucks into the “fins” on the belt cover.
- Reuses the existing LED light for illumination (Optional, but laws and stuff…)
- Invisible from the right hand side of the bike.
- Mount the plate first for an easier install.
- Wires tuck in behind the bracket.
- Requires two M5x16mm bolts and nuts.
- A little blue locktite for good measure.
- Plate holes are 70mm on center. May not work for all plates. I can provide other sizes if needed.
I printed this extremely thick and solid in PLA… Will it hold up? No idea.
If it doesn't I will report back with how long it lasted and reprint it in carbon fiber reinforced filament.
For information on installing… mostly follow the first 20 seconds of this official guide. You'll figure it out. I have faith in you!
If you like what I'm doing, and are in the market for a motorcycle please consider using my affiliate link when purchasing to support my work.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)