M-LOK Sleds - Picatinny - STANAG 4694 Rails - Free 3D Print Model

Search models, users, collections, and posts

hottr

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 3 walls, 25% infill

Designer

14.6 h

11 plates

5.0(34)

100% infill, ironing, easy to remove support

19.3 h

11 plates

5.0(10)

Open in Bambu Studio

Boost

335

849

927

512

Released

Description

Works with Nut and screw from last image, If yours is different you might need to adapt the hole so it is not too loose or too tight.

Supports are close to the print and might be slightly difficult to remove but are necessary for good finish. It prints well in Bambu PLA Matte and supports come off cleanly (but you need to pry them off initially due to how close they are to the model. I've attached image of one of the rails to show what surface you should expect.

Make sure to follow me to be notified about uploads.

If you like my work I would really appreciate the likes and reviews. Please also log in to maker world so your download counts towards the points.

Thanks!

Boost Me (for free)

I would also be honoured to be a recipient of any boosts you might hand out. I can convert boost to points and those help me to get the filament for prototyping of more cool airsoft stuff.

Comment & Rating (50)

@Jayden293475

Print Profile

100% infill, ironing, easy to remove support

really good quality design

@Sniels

Boosted

Print Profile

0.12mm layer, 3 walls, 25% infill

amazing!

@TheCraftyBih

Any tips to remove the supports?

The designer has replied

@hottr

for me they usually stay on the build plate. Once part cooled down they should come off quite easily. If not try wedging something between part and supports.

@TheCraftyBih

Replying to @hottr :

Thank you! I did take them off cool and tried to use an xacto knife. I'm going to reprint and try again.

@user_3021894046

What exactly are these screws Metric or imperial

The designer has replied

Show original

@hottr

I think they are M5 metric. other M5 screws I have work with the nuts.

@justWoolF

Print Profile

100% infill, ironing, easy to remove support

Great print, works perfect - thanks to the designer!

@VadymUa

Print Profile

0.12mm layer, 3 walls, 25% infill

55555555555555

@westcoastslime

Print Profile

0.12mm layer, 3 walls, 25% infill

absolutely perfect

@user_666600681

Print Profile

0.12mm layer, 3 walls, 25% infill

very nice model thanks

@SamMichaud

Print Profile

0.12mm layer, 3 walls, 25% infill

top

@user_3588786790

Boosted

Print Profile

0.12mm layer, 3 walls, 25% infill

printed fast and without issue

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.