Vertical laptop and tablet stand - Free 3D Print Model

Search models, users, collections, and posts

Jiwet

Household>Office

IP Report

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Print profile 1 - 10mm - 0.2mm layer, 6 walls, 25% infill

Designer

5.7 h

1 plate

4.9(92)

Print profile 2 - 26mm+15mm 0.2mm layer, 6 walls, 25% infill

Designer

6.7 h

1 plate

4.9(38)

Print profile 3 - 30mm+15 mm 0.2mm layer, 6 walls, 25 infill

Designer

6.7 h

1 plate

4.9(37)

0.2mm layer, 4 walls, 20% infill

5 h

1 plate

5.0(6)

Open in Bambu Studio

Boost

833

2600

240

154

3.5 k

2 k

Released

Description

Vertical laptop stand with an extra slot for an tablet or a phone.
The weight from the laptop makes the tablet/ipad stable and perfect to use in the stand.

Print with standard profile or strength profile if you have a heavy laptop or want the stand to be more hefty.

Measurements:
Print profile 1 - Thickness laptop 26mm, tablet 10mm, width 150mm, 80degree angle.

Print profile 2 - Thickness laptop 26mm, tablet 15mm, width 150mm, 80degree angle.

Print profile 3 - Thickness laptop 30mm, tablet 15mm, width 150mm, 80degree angle.

Update 240131: I've added a printprofile for thicker tablets. (Up to 15mm) see profile: Print profile 2
Update 241119: I've added a printprofile for thicker laptops. (up to 32mm) see profile: Print profile 3

Comment & Rating (240)

@rcassani

Boosted

Thanks , very nice model and useful! In my case, I needed for two laptops, so I made a modification. @Jiwestam, if you allow publishing remixes of this work, I'll be more than happy to share the double-laptop model.

@sage117

Print Profile

Print profile 2 - 26mm+15mm 0.2mm layer, 6 walls, 25% infill

printed well and holds my tablet fine

@Aaryan11

What settings u used to print like this with colours blending in?

(Edited)

@sage117

Replying to @Aaryan11 :

This was just the filament actually. It was a dual color one which was purple and black.

(Edited)

@user_3029385525

loved this item and printed well, but unfortunately can’t fit any phone or tablet in the first compartment, maybe only without a cover but will be tight anyway. if possible to add even half cm this would be awesome

The designer has replied

@Jiwet

Great that you liked my model, there is two diffrent versions with 10mm and 15mm for the front. The 15mm should fit most phones or tablets including case. If it's not fitting your phone please return with the thickness and I'll creat another version :)

@user_3029385525

Replying to @Jiwet :

thank you, I didn’t realized that and printed a wrong one. 30 and 15mm must be the best choice!

@Legado

Boosted

The print profile is no longer public

It can hold my Kindle of my laptop without any problem. the weight makes it feel sturdy and strong and I feel safe living any of my laptops sitting on this? amazing piece of printing. the printing was super easy, and I didn't have any problems at all.

The profile uploader has replied

@Jiwet

Thanks a lot for your positive review, glad to hear it comes to use!

(Edited)

@realdev

Thanks for this model! My first print, in Elegoo’s Black PETG, failed in a successful way. I started it before I went to bed and woke up with the partial print and a bunch of stringy filament everywhere. However, the partial print was able to support, both, my Dell Presario and my MacBook Air, so I decided to try and print it in BambuLabs Translucent Gray PETG. This time, I purposely canceled the print around layer 350. It looks good and works well, the only thing I need to figure out is how to skip from layer 350 to like layer 748 so the side is filled in.

The designer has replied

@Jiwet

That’s actually a great failure, and awesome to hear it’s already strong enough to hold both laptops Regarding your question: unfortunately, you can’t truly “skip” layers in a normal FDM print and resume at a higher layer number. Once the printer stops, there’s no reliable way to restart at (say) layer 748 and have it bond correctly to the existing part. (that I'm aware of)