Manchester City Logo Light Box

A light box of Manchester City Football Club logo, its designed to hang on the wall, and has two rear nail hole slots for being mounted in an easy way.

This one took a bit to optimize visuals since the logo is a 5 color logo, and a single AMS only allows 4 colors. Its been designed to visualize the appropriate color and logo when lit, but as you can see when its not lit up the red flower appears white.

Total layer height for the logo is 1mm, to hit the appropriate shading, their are varying layer heights of 0.6mm and 1mm.

In order to print appropriately, a pause at the start of layer 0.8mm is required, where you swap white filament with red, this allows the last two layers to be printed on top of the white flower in red. A second pause is required at the start of layer 1.2mm if you want the back walls to show as black, at this pause you will swap out the dark blue with black.

I have found the remote control strip lights that are battery powered and remote controlled work well. I have also tried out utilizing the battery powered remote controlled LED pucks for undercabinet lighting work well, you can put a few inside the box with double stick tape and get a good look.