RomeoAlfa

cover

IMG_5189.jpg

IMG_5193.jpg

Screenshot 2024-09-15 at 9.04.22 PM.png

plate_1.png

2024-09-15_97ecff708b8598.jpg

0.2mm layer, 3 walls, 10% infill

tylerjustuspaige

multicolorpsoes.jpg

I liked the two tone from the creators photo so I made a two tone version and added variable layer height smoothing to speed up the print

2 color variable smooth layer, 3 walls, 10% infill

t2b_rideguy

IMG_1321.jpg

IMG_1317.jpg

IMG_1322.jpg

Profile created using PETG HF using P1S. a bit of stringing that will need cleanup at seams. If i print another I will probably modify profile to smaller layer height due to overhangs at bottom fillet, and likely also randomize seam location for strength and more even post-processing.

PETG 0.6mm nozzle, 0.22mm layer, 3 walls, 12% infill

plate_2.png

swimbikerun3d

IMG_2524.jpg

IMG_2525.jpg

Screenshot 2025-04-13 at 6.15.41 AM.png

Model split for printing ability on the A1 mini.

A1 mini - Split Plates

eatbeefsalad

IMG_6919 Medium.jpeg

0.6mm nozzle, 0.3mm layer, 2 walls, 10% infill

IMG_1346.jpg

IMG_1349.jpg

Optimized my prior PETG Profile to clean it up by<ul><li>adding variable layer height for quality on chamfers while still minimizing print time</li><li>moving the seam to the back, which cleaned it up a lot</li><li>adjusting bed temp to reduce risk of print failure with the half-spool requirement</li></ul>Notes:<ul><li>14% infill</li><li>gave it a light sand with 220 and added adhesive cabinet bumpers as feet</li><li>was printed with PETG HF, but the speed isn&#39;t so extreme that other PETG should be a problem</li></ul>

Optimized PETG 0.6mm, Variable layer

MarkusPrints

PXL_20260226_234311482.MP.jpg

PXL_20260227_022735410.MP.jpg

PXL_20260227_022741283.MP.jpg

<ul><li>0.4 nozzle</li><li>0.2mm layer</li><li>6 wall</li><li>15% gyroid</li><li>ABS</li><li>variable layer height</li><li>Version: PSOAS v1.3mf</li></ul>

0.4 nozz, 0.2mm layer, 6 wall, 15% gyro, ABS, variab layers

giange77

20260504_080949.jpg

Printed using BambuLab PLA Though+ for increased strenght.Logo printed with AMS using standard PLA.

PLA Though+ 0.28mm layer, 4 walls, 11% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

PSO-RITE Style Psoas Muscle Release Massage Tool.&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please BOOST me if this helped you out! Thanks!</boostcontent></boostme>

PSO-RITE Style Psoas Muscle Release Massage Tool

ASIA

Print Profile(8)

Description

Comment & Rating (144)

License

Related Models