Search models, users, collections, and posts
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
5.5 h
1 plate
Open in Bambu Studio
Boost
21
32
4
7
42
20
Released
Description
Project: 1cat.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x242.12mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.2
PLA BambuLab Basic Blue Gray Transmission Distance: 3.1
PLA BambuLab Basic whiteTransmission Distance: 3.6
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #14 (1.2mm) swap to Blue Gray
At layer #22 (1.84mm) swap to white
for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (4)