soonsoon

cover

썸네일.jpg

BodyPart

plate_1.png

CoverPart

plate_2.png

BladePart

plate_3.png

2024-09-15_d4d4c306aed95.jpg

스크린샷 2024-09-15 오후 2.22.34.png

스크린샷 2024-09-15 오후 2.22.38.png

스크린샷 2024-09-15 오후 2.22.47.png

This project file consists of 3 plates.1) Body - The body profile consists of 2 body files. - You can print with 0.2 mm layer Height. - The default settings are sufficient. - It is better to use the Strenght setting.2) Cover- In my case, I used Silk filament, but you can use regular pla or petg. - If possible, it is better to use petg with good strength. - The wall is made of 6 layers and is sturdy. - The internal filling is 25% high. - Supporters and brims are set for each part.3) Blade - It should be printed with TPU. - It is good if the volume speed is less than 3mm/s3. - The brim is set.

0.2mm layer, 2 walls, 15% infill

This is a toy spear weapon I made for my son. The blade part is made of TPU, so it is made with a soft and safe material.The top cover part may be difficult to make, so I recommend printing it at a much lower speed.&nbsp;For the manufacturing and assembly method, please refer to the YouTube link below.<figure class="media"><oembed url="https://youtu.be/14lN92HdY3I"></oembed></figure>&nbsp;Contact soonsoon@soonsoons.com

Toy Spear

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models