PHS Poo Handling System for X1 P1 Series Printers - Free 3D Print Model

Search models, users, collections, and posts

tooling_lee

3D Printer>3D Printer Accessories

IP Report

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

V7 0.2mm layer, 4 walls, 10% infill

Designer

56 h

5 plates

4.9(44)

0.24mm layer, 3 walls, 12% infill

Designer

46.4 h

5 plates

5.0(20)

for 0.6mm nozzle with petg/pla support

43.9 h

9 plates

5.0(2)

PHS TPU pads

4.8 h

1 plate

Open in Bambu Studio

Boost

954

2055

252

422

1.8 k

627

Released

Description

New Different Version

PHS Side Car Poo Handling Sys for X1 P1 Printers Remixed by tooling_lee - MakerWorld

The 3rd design for the X1 to complete the Poo Handling for all Bambu machine designs. I used PETG on the base and PLA for the drawer and hopper. I used CA Glue to adhere the sections together. I have 4 magnets on the hopper to keep the hopper tight to the back of the machine. I used 12mm but the reliefs are setup for 24mm magnets but anything 12-24 x 2mm thick will work.

This design will increase the height of your machine by 110mm.

2025-01-12 - V15 added a modular version that uses no glue, t-slots together and improved hopper. Reduces plastic usage to print.

2024-09-24 - V5 Updated the hopper to lip over the gap in the back, increased the back stop height.

2024-11-19 - V7 Increased the notch size for poo, added a picture to show the difference. You can notch your current print to save plastic. Changed the hopper to the poo blower version, works with or without the blower fan.
The USB blower is from Amazon