HueForge DPD Logo Shield Sign Package Box

Hello

I am currently experimenting a bit with the HueForge software and have designed a small DPD Logo sign in this way, which has found its place on our mailbox.

Can also be scaled flexibly, but as with all HueForge, please do not scale the Z height.

Please note the layer height! 0.08 and 0.16

I printed with PLA Basic Black, Red and White on P1S.

Freue mich über jedes Like, jeden Kommentar und gerne über Eure Fotos mit dem Print.

Here are the exact print details:

Project: DPD Logo.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 93.6x39mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #21 (1.76mm) swap to Jade White for the rest.