HueForge DHL Deutsche Post Logo Sign Package Box

Hello

I'm currently experimenting with HueForge software and have designed a small DHL logo sign using it, which now adorns our mailbox.

It can also be scaled flexibly, but as with all HueForge designs, please do not scale the Z height.

Please note the layer height: 0.08 and 0.16

I printed it with Bambu Lab PLA Basic Black, Yellow, and Red on a P1S.

I appreciate every like, every comment, and would love to see your photos of your prints.

Here are the precise printing details:

Project: DHL Paketbox Logo.png.hfp
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm

The Model is 100x39.09mm in size
You may print at higher layer heights below the minimum depth of 0.48mm
The maximum depth is 2.2mm and the actual depth is 2.2mm

Filaments Used:
Bambu Lab PLA Basic Black Transmission Distance: 0.6
Bambu Lab PLA Basic Red Transmission Distance: 4
Bambu Lab PLA Basic Yellow Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #19 (1.6mm) swap to Yellow for the remainder.