Cybertruck Snap-fit 1:30 Scale

Modular 1:30 scale Tesla Cybertruck

A simple snap-fit model, glue is required to affix windows and tire caps/snap pieces. I would recommend glue to affix the top and bottom halves together, however it is not required to sit on a shelf. This is mostly a port to Maker World from thingiverse so more people can enjoy this amazing model with tested print plates on an X1 Carbon. The A1 plate is made purely as a starting point, A1 makers feel free to test and make alternate print profiles if necessary.

I tilted the wheel inner snap piece because printing flat caused the wheels to break at the layer line. The orientation and manual support added was the best I could come up with to rectify the problem and has worked well for me thus far. Granted, some minor sanding was necessary to round off the first layer. I also recommend assembling the wheels first, letting the glue dry FULLY before assembling to the underbody. It does take a considerable press to get the wheels where they need to be, fitment is very secure and they can rotate semi-freely.

The Cybertruck print pictured above had a white headlight and red brake light added in post with an acrylic marker.

Original model attributions are attached to all models, original remixes from thingiverse are linked here, please support the original creators if you feel so inclined :)