Love this base you used for this model. Could you tell me where I can find it?

user_3241721787

Thanks! Unfortunately this person didn't allow any remixes so I couldn't post the color change or the base to his profile. I'll add the base to my uploads so you can grab it there.

Serbsensation

This model is beautiful! I made some small tweaks with the color but I also added a Roman Ogee to the base for an added detail. 

I printed this on a P1S and the tolerances were perfect, it went together without glue just pressed it in. 

Tolerances were a little tight but printed amazing!

Krafty3D

Easier to print, Face Down, Fixed Base Top Layer, A1 Compatible

I found the same, had to cut and sand which I don't like doing. Tries scaling it down but that didn't work.

sundance4

I have the same issue and was wondering what everyone else did. I’ll try to file it down a bit and see. 

mzdebo

cstoutr

I like the plate you used. Great idea! the texture it leaves works very well with this piece.

RoyalT

Nice christmas table decoration. Printed with BBL PLA Matte white and sparkle red.

wamurumk

0.2mm layer, 3 walls, 15% infill

The model works as is, but does not scale, any change in orientation or scale up or down results in the base plate not printing flat. 

Mikey1241

a little tight wit the slots. otherwise an awesome print. 

Cruel_Paradox

A very fun holiday sign, but the tolerances are tiiight. Once together, it isn't coming apart to store flat for the rest of the year.

Glitch24

Take care when inserting into the base as the fit is very tight. Consider sanding the tabs down or enlarging the holes slightly to avoid damaging the delicate bits. Looks really nice 👍

mrbishi

My first multi colour print after getting my P2S for Christmas. Turned out great! 

Printed in Bambu PLA Matte white & silk red.

user_1185655282

user_829602375

lindnjoe

cover

Prints (5 of 9).jpg

Prints (6 of 9).jpg

Prints (8 of 9).jpg

plate_1.png

plate_2.png

Prints (7 of 9).webp

plate_1.webp

plate_2.webp

plate_3.png

20231126_222755.webp

plate_3.webp

Shrunk the model to 98% size to fit the A1 build plate.&nbsp;Flipped the lettering and snowflakes over so that the layer lines are hidden much more. &nbsp;Changed Wall Generator to Arachne, which makes this model MUCH easier to print. In the original with classic walls, it starts the first layer by laying down a lot of tiny triangles and lines that can easily come loose from the build plate. With Arachne walls, the tiny triangles are not needed so the first layer is much more consistent and easier to print. &nbsp;Lastly, in the original model, the top layer of the base piece was not perfectly flat. Leading to a weird corner that was 1 layer taller than the rest. I added a negative block to remove the top layer and make it perfectly flat.

1000002744.jpg

1000002745.jpg

<ul><li>Printed in PLA</li><li>.16 Layer height with adaptive layers and smoothing for the base curves to be clean</li><li>Other than the base, top surfaces printed downward so that you get the texture and professional look from the build plate. It could also be awesome to print this on a 3D effect plate to get some extra shimmer from either the Galaxy or the Starry effects. I haven&#39;t tried this myself yet but if I do I&#39;ll upload some photos</li></ul>This is currently at the front desk of my business and a lot of people have commented on it!&nbsp;

Merry Christmas Sign with Multi-colour and NEW base!

Merry Christmas 3 part standing decoration

Print Profile(3)

Description

Comment & Rating (454)

License

Remixes (4)

Related Models

Merry Christmas Decorative Sign