Search models, users, collections, and posts
Lexus IS300 Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
3.9 h
1 plate
Open in Bambu Studio
Boost
54
122
12
9
101
47
Released
Description
Project: is300 v2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x264.8mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #20 (1.68mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (12)