Aerosol Spray Nozzle - Free 3D Print Model

Search models, users, collections, and posts

Mike Jackson

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Aerosol Spray Nozzle Med Length Nozzle

Designer

16 min

1 plate

4.6(59)

Open in Bambu Studio

Boost

264

708

1.2 k

820

Released

Description

Here is a simple Aerosol Spray Nozzle. It will fit any can with a 4mm piped opening and has a 1.8mm spout to deliver the spray with reasonable force. Most cans show a reasonable 8-12 inches of spray.

For quality, I would suggest you allow this to print slowly. For some reason, Bambu Filament at profile speeds will print too fast for the overhang and give a poor surface quality. The pre-setup profile is set for 60mm walls and that appears to help a lot. So, if you take the STEP file and use your own settings, be aware.

Comment & Rating (62)

@user_2446700710

Print Profile

Aerosol Spray Nozzle Med Length Nozzle

good design and print parameters. only improvement would be if it fits snuggle on the can. still works though

@JustMike36

Print Profile

Aerosol Spray Nozzle Med Length Nozzle

it fits the spray can nozzle, but it does not work as expected.

@Kat0

Print Profile

Aerosol Spray Nozzle Med Length Nozzle

Nice!

@Itamar

Boosted

Print Profile

Aerosol Spray Nozzle Med Length Nozzle

works perfectly

@Smotech3d

Print Profile

Aerosol Spray Nozzle Med Length Nozzle

did not use it on aerosol but it kinda works on air wick

@luizvidoto

Boosted

Print Profile

Aerosol Spray Nozzle Med Length Nozzle

Printed without problems. It works great! 👍

@balkajozsef

Print Profile

Aerosol Spray Nozzle Med Length Nozzle

@qxftqxxn8p

worked grat for my clogged Hairspray-Bottle! thank you for providing STEP-files!!!! :) Edit: how can I add a rating ? I also want to give 5 Stars

(Edited)

@616AJ

Print Profile

Aerosol Spray Nozzle Med Length Nozzle

Printed in ASA, the hole for the shaft coming out of the can is too small and won't fit any of my standard cans. probably due to a mixture of shrinkage but it ain't even close. the layers all printed fine and the print is strong, it just doesn't fit. I'm going to try scaling it up to see if that fixes it

The profile uploader has replied

@just4memike

There isn't a "standard" size spray fitting. This model is specifically for 4mm fittings as referenced, it is possible to scale up, but you may run into other fitment issues.