Tom-Tom the pumpkin turkey

Here you have what I think is the cutest turkey I ever printed

Tom-Tom will be the favorite on your thanksgiving dinner.

with his pumpkin body, colorful tail and cute red wattle you can be sure that it will not leave anyone indifferent.

Every part is separated, to print it in multicolor. just use a little glue to join them and you are done.

Print everything in the default orientation and you wont need supports (I tried it at both 100 and 125% scale).

Printing and Assembling:

• you can separate the tail into parts to paint then individually, or just add a filament change at height and save time and filament.

• Assembling the face can be a little tricky, depending on the calibration of your printer, due to tolerances. but with patience and correct orientation when printing you should be covered.

FIRST: print all the eyes pieces, separated by color, in the orientation provided in the files.

SECOND: join all the pieces of each of the eyes, and once they are ready glue them to the face

THIRD: attach the wattle to the beak, which should fit with a little pressure. add a little glue.

FOURTH: attach the assembled beak to the face, and the face is done!

• Print the hat, glue the pieces together and attach everything to the body and it will be ready to melt the heart of whoever sees it.

Print Settings

Material: PLA / PETG

Layer height: 0.16mm or 0,20 mm

Nozzle diameter: 0,4mm or 0,6mm

Infill: 10-12%

Perimeters: 2

Supports: no

this is one member of my original "HomePals" collection that you can see here:

MEAF designs | Published - MakerWorld

________________________

If you like my designs and want to support me or sell physical prints, you can check out my patreon

https://www.patreon.com/meafdesigns